WL-TEMP-RH-WHIP

Temperature- and humidity sensor with external 1.8m measure element:
• Sensor can be used with batteries or alternatively with 5VDC power supply when it becomes as a repeater.
• Room sensor has temperature and humidity measurement and also ”AUX-screw connector”.
• NTC10, ON/OFF state, transmitter or water leak sensor 0...100% can be connected to AUXscrew connector
• External measuring element is suitable for measuring e.g temperature & humidity inside walls and other structures.
• Battery charge descent doesn’t decrease signal strength.
• Operating frequency 869MHz (6LoWPAN technology).
Technical information:
• Case: ABS plastic
• Dimensions: 90 x 96 x 26 mm
• Installation: Surface installation
• Operating temperature: 0°C...+50°C
• Protection class: IP20
• Temperature:
• Meas. accuracy +10...60°C: ± 0,3°C
• Measurement area: -30...+100°C
• Humidity:
• Meas. accuracy 20...80%rH: ± 3 %rH
• Measurement area: 0...100%rH
• Any of the following measurements can be implemented by using the AUX connection:
• AUX temperature measurement:
• Measurement accuracy (25 °C): ± 0.3°C
• Measurement area: -30°C...+50°C
• AUX 0-10VDC transmitter:
• Measurement accuracy: 0.5% / 50mV
• Measurement area: scalable
• Power source operating as non-routing temp. sensor: 2 x AA batteries
• Power source operating as router: 5 VDC
• Battery life as non-routing sensor (not included in delivery). Energizer L91 Ultimate Lithium 3100 mAh:
• 15 min measurement interval: 9.5 - 15 years
• 60 min measurement interval: 12 - 20 years
• External power source (operating as router): 5 VDC